Google+ Followers

Thursday, 17 August 2017

Romance sample 2





Good morning all well I'm back again two days on the trot lol.
How are you all today I hope you are all well it's so nice to
Have time to be blogging again.

Today's card is my second card from the tattered lace scan n cut
Romance USB plus there's a new craftorium USB out tonight
At 7pm on create and craft and it's called pop up cards.

Anyway back to today's card I started off with a 8"x8" gatefold card
Out of cream card.
I then cut out all my layers out of red and cream on the scan n cut.
I cut a extra red heart which I added to the right hand side. I then added all the heart layers
To the left hand side using foam pads.

I then tied a red bow and I added it to the bottom corner.
I then used foamarin to make my flower which I added to the centre of my bow.
The foamarin is a wonderful material if you have never seen it.
It's a thin foam which you cut out your flowers shapes with the scan n cut or by dies.
Then you use the iron to warm it up when it drops off the iron it's ready.
And then which a ball tool you shape it while it's still warm.
If you go on to Utube you can watch loads of videos on it.
It's really worth giving it a try. I tried making some poinsettias on the scan n cut
Which turned out ok and they look so feel and feel real too.




That's all for now
Hugs Debs xxx

Wednesday, 16 August 2017

Romance sample one






Good morning all friends followers and visitors 
Before I start on about today's card I would just like
To thank all the well wishes I have had for the
Loss of my Dad who sadly passed away after being ill
For a while.

I would really like to thank My friend Jennifer Bradley
As she as been there for my me while Dad was ill and then
After he passed.
Jen you are a amazing friend and thank you so much.

Anyway back to today's card it was made by using the new
USB from Tattered lace Romance from the scan n cut.

I started by making a large card I then covered it with a pretty paper
I then cut a frame on the scan n cut which I inked with pink.

Next I cut out my topper from the USB and I inked around the edge.
I added it to the centre of my card using foam pads.

Next I cut two banners on the scan n cut and I inked them and I 
added them across the centre.

I then made my flowers by using foamarin which I'm now addicted to
It's wonderful how it work as once you heat it it turn out to feel like real
Flowers.
I added them to the centre and left hand side.

To finish with I added a large pink bow which I added to the side
Of the flowers.

That's all for today and it's lovely to be back crafting and reading all
Your blogs
Once again thank you for your support.

Hugs Debs xxx

Saturday, 17 June 2017

Daisy May






Good morning all how are you all doing this morning.
It looks like we are going to have another lovely day.
Well we are only in June and today I have my first Christmas
card.

I started with a 8"x 8" white card blank which I mat and layered it
with Red and green card.
I then cut out a doily out of white card on the scan n cut.
I added this to the centre of my card using foam pads.

Next I printed off mt image from the New cd called daisy May
from Whoopsidaisy.
I then cut it out by using the scan n cut it makes it so much easier the
use the scan n cut as you get a equal border all way around the image.

I used foam pads to add her the the side of the doily.
Next I cut out the Mistletoe out from the Christmas 1 craftorium usb.
Which I added to the right side of Daisy.
I also cut out a red bow and I added this to the top of the Mistletoe.

To finish off with I added some gems to the mistletoe and the corners 
of the card.

Thats all for today and thank you for stopping by and I
hope you all have a good weekend.

Hugs Debs xxx

Thursday, 15 June 2017

House Lanternorium





Good morning all I hope you are all well this morning.
Today's project ia another sample from the
Christmas Craftorium usb which launched lastnight
on create and craft.

I have also got some free tickets to the Doncaster crafting live
show on the 15th and 16th of July so if there are any of you wanting to go
and would like two free tickets just let me know.

For this lantern I cut it out of black card and I made it up
using red liner tape.
Before I tied the top I added some battery lights.

I then cut out a poinsettia which I added to the top of the box.

That's all for today and thank you fr stopping by.

Debs xxx

Wednesday, 14 June 2017

Lamp Post





Good morning all I hope you are all well this morning.
Today see's the Launch of the new Craftorium Christmas 17 USB
on create and craft I'm sure this one will be a sell out as it as 
got some wonderful projects on it.

This is just one of the sample that I've dome and I have to say I
love it I will be doing one for my self for a table centre piece as I've
put lights in it.
The photo doesn't show how big it is It's just short of 3ft but you can
make it what ever size you like it.

If anyone would like one I'm selling them as a flat pack for you to build
for £10 including instructions and light just leave me a massage so 
I can get back to you.

Hugs Debs xxx

Tuesday, 13 June 2017

Centre stepper card







Good morning all I'm sorry I've been missing for a while but
Dad as is back in hospital after another heart attack so I've been
running about to the hospital and back so my crafting as been put on 
hold.
Today's card is one that I did a few weeks ago it is from the samples
I did for the Tattered Lace Scene Builder USB for the scanncut.

I really enjoyed doing this card as i is a bit different for me as
I usually do square cards.

Tomorrow I will post a sample that I've done for the new Craftorium
Christmas USB which is showing on create and craft on Wednesday.
And I'm sure you will love whats on this USB.

But until them

Hugs Debs xxx


Wednesday, 31 May 2017

Scene Builder USB Sample








Good morning all how are you all doing I'm so sorry I've not been around 
commenting for a few day's as I've been sitting with my Dad
24/7 as he is really poorly.

Today's card is a sample I did for the last scan n cut USB which is 
Tattered Lace's Scene Builder.

I started off with a 8"x 8" white card and I mat and layered it
with pink and a patented paper.
I then cut out my topper out of white card on the scan n cut.
I  then coloured the flower's in pink just to make them stand out.
I added it to the centre of my card.

I then tied a large bow ut of pink satin ribbon which I added to
the bottom corner I also added some pearls and a large centre gem
to the centre of my bow..

To finish off with I added some pearls to the corner's.

That's all for today and I hope I will be back tomorrow if Dad start's 
to pick up a bit.

Hugs Debs xx

Friday, 26 May 2017

Scanncut sample three






Good morning all how are you all doing and are you coping 
with this lovely weather.
It would be lovely if I could sit in it but my time is spent
at the hospital these day's.

Anyway today's card Is the third sample from the tattered Lace
Scene Builder Scan N Cut USB.

I started off with a 8"x 8" white card and I cut my mat and layers
of silver mirri card and white glitter card.

Next I cut my hearts by using the basic shapes on the scan n cut
out of mirri and glitter card.
I added this to the centre of my card.

Next I cut the wedding scene from the USB out of mirri card and I added 
it to the right hand side of the heart. And then
I cut my sentiment out of mirri card and this is from the 
sentiments and phrases USB.
I added it to the top corner of the heart.

To Finish off with I tied a large white bow which I added
to the bottom corner and then I added a large gem to the
centre of the bow.

That's all for today and thank you for stopping by.
And a big thank you for all your well wishes for my Dad there
are really appreciated

Hugs Debs xx

Thursday, 25 May 2017

Scan n cut Scene Builder USB sample two








Morning all I hope you are all well this morning well we
thought that Dad was coming home out of hospital today but
last night he had another heart attack so it looks like he
will be staying longer.

Today's card Is a sample that I did for the Scene Builder USB
for the scanncut.

I started with a 8"x 8" white card which I added a mat of pale blue
card.
Next I cut a scalloped mat out of a paler blue card on the next layer I
cut it a fraction smaller and I cut a aperture down the left side.
I wrapped a piece of white lace around my bottom layer and then
I added my two small mats to the centre of my card.

I then cut out my sentiment out of white glitter card which
I added to the centre of my aperture.
Next I cut the humming bird out of glitter card which I added to
the side of the aperture.
I the cut some flower's and I added these to the top of the aperture.

To finish off with I tied a large blue bow which I added to the bottom corner.
I added a large gem to the centre of the bow.

That's all for today and I thank you so much of stopping by.

Hugs Debs xx



Wednesday, 24 May 2017

Pick Of the day Sample One






Good morning all how are you all doing this morning.
I would just like to thank you all for the best wishes I have receive
for my Dad he is a little better Just hope he keeps going
that way. It's been a long 8 weeks.

Today's card is the 1st sample for the Pick Of The day
Build A Scene USB for the scan n cut.

I started of with a 8"x 8" white card which I mat and layered it with 
pink card. I then cut a scalloped strip of card which I wrapped a piece of white
ribbon around it before I added it  to my card about
3ins from the bottom.

Next on the scan n cut I  cut myself a frame out of white card I
added this to my card with foam pads.
I then cut the horse and carriage from the USB out of mirri card.
I added this to my card so that it's sat on the strip of card so it
looks like the road.

I then cut out my sentiment from the sentiment and phrase's USB
and I added it across the top corner.

Then I tied a large white bow and I added it t the bottom corner.

To finish off with I added some gems and pearls around the frame.
I added a small flower to each end of my sentiment.
And a gem into the centre of my bow.

That's all for today and more samples to follow.

Hugs Debs xx

Tuesday, 23 May 2017

Bathroom wall Decoration







Good morning all hope you are all well today.
And If not I send you some crafty hugs.

Today's project is for my wet room wall I started of by buying the
hearts from B and M stores and then I painted it white.

I then joined them together with white ribbon.

With the scan n cut I cut out the roses in different sizes I made them
all up while sat at side of Dads hospital bed.
With the heat gun I added then to the hearts. The wet room is nearly
done we have just got to paint it now I'm having it all white with
Aqua accents I just cant wait to get it all finished.

That's all for today and thank you for stopping by.

Hugs Debs xxx  

Monday, 22 May 2017

Vase Of Lilly's





Good morning all how are you all doing this morning.
Sorry I've been missing for a few day's but my Dad is back in hospital
with another two more heart attack so we have been sitting with him.

Today's project is a vase of lilly's that I have been making while
I've been sat at side of Dad.

It is for my new wet room so I've used the colours of my towel's.

 cut them out on the scan n cut and the vase was even cut with it.
So I have had the nurses coming in to see how I were doing.
I coloured the petal's before I made the Lilly's up.
And I used pipe cleaner's and fine wire for the inside of them.
And then I fastened the flower's on to wooden skewers fr the stems.

I then made my vase up and I then added some Oasis into the bottom of the
vase for the stems to stick in to.
To finish the vase off I added some pearls around the edges.

That's all for today and thank you for stopping by.

Hugs Debs xx

Thursday, 18 May 2017

offset shutter card






Morning all hope you are all will this morning. wish I were
I've been up most of the night with a terrible head ache Just
cant get rid of it I think it because I am so tired.

Anyway back to today's card I'm sorry that the colours
are not showing true as the blue is a lovely powder blue.

I started of be cutting my base card in black and then I cut the lace panels
in the powder blue card.
I then cut all my mats and layers out of black and blue.

I then added all my layers to the card base.
I then added some pearls to the lace panels.
It is a really quick card once you have cut everything out.
I haven't added a sentiment yet as It's a card to go in my box
ready for when I need on.

That's all for today and thank you for stopping by and 
leaving your lovely comments. I do really appreciate them.

Hugs Debs xx